Vivotek IP8173H - Page 163

VIVOTEK
User's Manual - 163
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
baudrate 110,300,600,120
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
9600 4/4 Set baud rate of COM port.
databit 5,6,7,8 8 4/4 Data bits in a character frame.
paritybit none,
odd,
even
none 4/4 For error checking.
stopbit 1,2 1 4/4 1
2-1.5 , data bit is 5
2-2
uartmode rs485,
rs232
rs485 4/4 RS485 or RS232.
customdrvcmd_i<0~
9>
string[128] <blank> 1/4 PTZ command for custom camera.
speedlink_i<0~4>_n
ame
string[40] <blank> 1/4 Additional PTZ command name.
speedlink_i<0~4>_c
md
string[40] <blank> 1/4 Additional PTZ command list.
ptzdriver 0~19,
127 (custom),
128 (no driver)
128
(no driver)
1/4 The PTZ driver is used by this COM
port.
7.22 SNMP
Group: snmp (capability.snmp > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
v2 0~1 0 6/6 SNMP v2 enabled. 0 for disable, 1 for
enable
v3 0~1 0 6/6 SNMP v3 enabled. 0 for disable, 1 for
enable
secnamerw string[31] Private 6/6 Read/write security name
secnamero string[31] Public 6/6 Read only security name
authpwrw string[8~128] <blank> 6/6 Read/write authentication password