Vivotek IP8173H - Page 173

VIVOTEK
User's Manual - 173
h264_ maxframerate A list of
<Positive
Integer> and
"-"
20,
20,
20,
20,
20,
20,
20
0/99 Maximum fps that the device can encoded
with H.264 on resolutions in current video
mode.
"-" means not support.
h264_maxbitrate <Positive
Integer>
40000000 0/99 Maximum bitrates of H.264.
The unit is bps.
streamcodec <Positive
Integer>
7,7,7 0/99 Represent supported codec types of each
stream.
This contains a list of positive integers, split
by comma. Each one stands for a stream,
and the definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
7.27 WebAPI: Information for a mode
Group: capability_videoin_c<n>_mode<m>, n = channel index from 0 to "capability_nvideoin"-1, m = mode
index from 0 to "capability_videoin_c<n>_nmode"-1
PARAMETER VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
effectivepixel <WxH> <mode
dependent>
0/99 The visible area of full scene in this video
mode.
The unit is pixel in source.
outputsize <WxH> <mode
dependent>
0/99 The output size of source, equal to the
captured size by device, in this video mode.
The unit is pixel.
This value is used as a basic coordinate
system for many features, like ePTZ, privacy
mask, motion, etc.
binning 0, 1, 3 <mode
dependent>
0/99 Indicate binning is used or not in this video
mode.
0: No binning
1: 2x2 binning
3: 3x3 binning
nresolution <Positive
Integer>
<mode
dependent>
0/99 How many resolution options in this video
mode.