Vivotek IP8173H - Page 199

VIVOTEK
User's Manual - 199
atecontrolmode=<value>&h264_quant=<value>&h264_qvalue=<value>&h264_bitrate=<value>&h264_maxfr
ame=<value>]
<product dependent>
PARAMETER VALUE DESCRIPTION
codectype mjpeg, mpeg4, h264 Set codec type for Anystream.
resolution capability_videoin_resolution Video resolution in pixels.
mjpeg_quant 1~5,
99
Quality of JPEG video.
99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
mjpeg_qvalue 2~97 Manual video quality level input.
(This must be present if mjpeg_quant is equal to 99)
mjpeg_maxframe 1~30 Set maximum frame rate in fps.
3M : 1~20fps
1080P : 1~30fps
mpeg4_intraperiod 250, 500, 1000, 2000, 3000,
4000
Intra frame period in milliseconds.
mpeg4_ratecontrolmode cbr, vbr cbr: constant bitrate
vbr: fix quality
mpeg4_quant 1~5,
99
Quality of video when choosing vbr in “ratecontrolmode”.
99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
mpeg4_qvalue 2~31 Manual video quality level input.
(This must be present if mpeg4_quant is equal to 99)
mpeg4_bitrate 1000~40000000 Set bit rate in bps when choosing cbr in
“mpeg4_ratecontrolmode”.
mpeg4_maxframe 1~25 Set maximum frame rate in fps.
3M : 1~20fps
1080P : 1~25fps
h264_intraperiod 250, 500, 1000, 2000, 3000,
4000
Intra frame period in milliseconds.
h264_ratecontrolmode cbr, vbr cbr: constant bitrate
vbr: fix quality
h264_quant 1~5,
99
Quality of video when choosing vbr in
“h264_ratecontrolmode”.
99 is the customized manual input setting.
1 = worst quality, 5 = best quality.
h264_qvalue 0~51 Manual video quality level input.
(This must be present if h264_quant is equal to 99)