Vivotek IP8335H - Page 142

VIVOTEK
142 - User's Manual
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
disableirled <boolean> 0 6/6 Disable built-in IR led
enableextled <boolean> 0 1/6 Enable external IR led
bwmode <boolean> 1 6/6 Switch to B/W in night mode if
enabled
sensitivity low,
normal,
high
normal 6/6 Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5 0 4/4 Adjust saturation of image
according to mode settings.
contrast -5~5 0 4/4 Adjust contrast of image
according to mode settings.
sharpness -3~3 0 4/4 Adjust sharpness of image
according to mode settings.
gammacurve 0,45,50,60,70
,80,90,100
0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
profile_i0_saturation -5~5 0 4/4 Adjust saturation of image
according to mode settings.
profile_i0_contrast -5~5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3 0 4/4 Adjust sharpness of image