Vivotek IP8335H - Page 143

VIVOTEK
User's Manual - 143
daymodeendtime
00:00~23:59
18:00
6/6
Day mod end time
disableirled
<boolean>
0
6/6
Disable built-in IR led
enableextled
<boolean>
0
1/6
Enable external IR led
bwmode
<boolean>
1
6/6
Switch to B/W in night mode if
enabled
sensitivity
low,
normal,
high
normal
6/6
Sensitivity of light sensor
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME
VALUE
DEFAULT
SECURITY
(get/set)
DESCRIPTION
brightness
-5~5
-5
4/4
Adjust brightness of image
according to mode settings.
saturation
-5~5
0
4/4
Adjust saturation of image
according to mode settings.
contrast
-5~5
0
4/4
Adjust contrast of image
according to mode settings.
sharpness
-3~3
0
4/4
Adjust sharpness of image
according to mode settings.
gammacurve
0,45,50,60,70
,80,90,100
0
4/4
Gamma curve.
lowlightmode
<boolean>
1
4/4
Enable/disable low light mode.
profile_i0_enable
<boolean>
0
4/4
Enable/disable this profile
setting
profile_i0_policy
day,
night,
schedule
night
4/4
The mode which the profile is
applied to.
profile_i0_begintime
hh:mm
18:00
4/4
Begin time of schedule mode.
profile_i0_endtime
hh:mm
06:00
4/4
End time of schedule mode.
profile_i0_brightness
-5~5
-5
4/4
Adjust brightness of image
according to mode settings.
profile_i0_saturation
-5~5
0
4/4
Adjust saturation of image
according to mode settings.
profile_i0_contrast
-5~5
0
4/4
Adjust contrast of image
according to mode settings.
profile_i0_sharpness
-3~3
0
4/4
Adjust sharpness of image
according to mode settings.
profile_i0_gammacurve 0,45,50,60,70
,80,90,100
0 4/4 Gamma curve
profile_i0_lowlightmode <boolean> 0 4/4 Enable/disable low light mode.
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of
image according to mode
settings.
saturation -5~5 0 4/4 Adjust saturation of
image according to mode
settings.
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode
settings.
sharpness -3~3 0 4/4 Adjust sharpness of
image according to mode
settings.
gammacurve 0,45,50,60,70,80,90,100 0 4/4 Gamma curve
lowlightmode <boolean> 0 4/4 Enable/disable low light
mode.
Group: imagepreview
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
videoin_whitebalance auto,
manual
auto 4/4 Preview of adjusting white balance of
image according to mode settings
videoin_restoreatwb 0, 1~ 0 4/4 Restore of adjusting white balance of
image according to mode settings