It is important to leave a clearance of 10cm around the chassis. The clearance
is required to ensure an adequate airflow through the chassis to ventilate heat.
To ensure normal operation, maintain ambient airflow. Do not block the airflow
around chassis such as placing the system in a closed cabinet.
Hardware Installation
SATA hard disk(s) are user-supplied. The network video recorder can readily
accommodate most of the off-the-shelf SATA hard drives.
1. Use a Phillips screwdriver to loosen the retention screws from the bottom of
the chassis. Remove the top cover.
To Next Page
Loading...
Need help?
General
