EasyManuals Logo

Vivotek ND8312 Hardware Installation Guide

Vivotek ND8312
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
* Configured disk drive is missing
( the buzzer will be sounded until it
is manually disabled.)
3. NET
1 OFF The Ethernet port is disconnected.
2 Orange blinking Data is being transmitted and
received.
4. Wi-Fi
1 Solid Green Working in the AP mode.
2 Solid Orange Working in the Station mode, and
is connected to an AP.
3 Blinking Orange every
0.2 second
Working in the Station mode, and
failed to connect to an AP.
4 OFF Wi-Fi is off.
5. WPS
1 Blinking Blue WPS is searching for nearby
devices.
2 OFF WPS is not functioning.
Power Up and Power Down
To power up and power down,
On the initial configuration:
Connect the power adapter between the system and power outlet. To power
up after a power-down, re-connect the DC connector.
After the initial connection,
Press the software power down button on the management session to power
down. the system should start flushing the cached contents in system
memory and gracefully shut down.

Other manuals for Vivotek ND8312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek ND8312 and is the answer not in the manual?

Vivotek ND8312 Specifications

General IconGeneral
BrandVivotek
ModelND8312
CategoryNetwork Hardware
LanguageEnglish

Related product manuals