VIVOTEK - Built with Reliability
User's Manual - 119
11. When the NVR has little reserved power budget, and you attach a new camera, the NVR will
stop supplying power to the new camera.
9. The PoE automatic enlistment does not apply for cameras that come with preset credentials,
namely, password-proteced.
10. The PoE port status can reect the following situations:
A. PoE enable –PoE is working (port icon displayed in green on the upper-right screen)
B. PoE turned OFF –PoE manually disabled (turned to OFF)
C. PoE turned OFF –Port power overload (under camera name)
D. PoE turned OFF –Total power overload (under camera name)
E. PoE turned OFF –Abnormal power supply voltage(under camera name)
F. PoE turned OFF –Non-standard powered device (under camera name)
G. PoE turned OFF –Port error (under camera name)
The UI text on PoE power consumption will turn red if the total power budget is exceeded. A
warning event message will be delivered as push notication or via email.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
