VIVOTEK - Built with Reliability
User's Manual - 73
On the camera Management page, you can congure the following:
1. Recruit or disband cameras.
2. Create a camera name.
3. Binding: Designate how a camera is recognized. The default is MAC
binding. The NVR recognizes a camera by its MAC address regardless of
IP changes. If set to IP binding, static IP setting is preferred. If IP changes
occur, the NVR may not be able to access the cameras.
4. Protocol: You can select ONVIF to recruit cameras made by other
manufacturers.
5. Assign User name and Password, or apply the credentials to all cameras
in your conguration.
6. Change the Network settings.
7. Change the cameras' positions on the layout screen.
3-5-2. Settings–Camera–Management
MAC
The Camera menu provides access to Management, Recording, Media, Image, Motion
detection, and PTZ settings pages.
For camera name, you can enter up to 64 alphabetic and numeric characters including
[0-9][a-z][A-Z][_][-][ ]. For user name and password, you can enter up to 64 alphabetic
and numeric characters including [0-9][a-z][A-Z][!][$][%][-][.][@][''][~].
To Next Page
Loading...
Need help?
General
Weight and Dimensions
