VIVOTEK
User's Manual - 49
Media > Audio
Audio Settings
Mute: Select this option to disable audio transmission from the Network Camera to all clients. Note that
if muted, no audio data will be transmitted even if audio transmission is enabled on the Client Settings
page. In that case, the following message is displayed:
Internal microphone input gain: Select the gain of the embedded audio input (microphone) according to
ambient conditions. Adjust the gain by dragging pointer on the slide bar.
Audio type: Select audio codec AAC or GSM-AMR and the bit rate
Advanced Mode
.
■ G.711 also provides good sound quality and requires about 64Kbps. Select pcmu (μ-Law) or pcma
(A-Law) mode.
When completed with the settings on this page, click Save to enable the settings.
Advanced Mode
To Next Page
Loading...
