Vivotek PD8136 User Manual

VIVOTEK
User's Manual - 85
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 103 for detailed information.
■ Manual triggers
An event can be manually triggered by the manual trigger buttons on the main page.
3. Action
Dene the actions to be performed by the Network Camera when a trigger is activated.
■ Backup media if the network is disconnected
Select this option to backup media file onto SD card if the network is disconnected. Please note
that this function will only be displayed after you configure a networked storage (NAS). For more
information about how to congure the connection to a network share by a networked storage, please
refer to page 104.
■ Move to preset location
Select a preset location you’ve configured. Note that please configure Preset locations first. For
detailed information, please refer to page 82. Another checkbox will appear, Capture media after
moving to the location. You can select to record associated snapshot, video clip or system event
once the event is triggered and the camera moves to the preset location. See Add Media in the
following discussion.
To congure an event with the action to record video or snapshots, it is necessary to congure both the
server and media settings so that the Network Camera will know what action to take (such as which
server to send the media les to) when a trigger is activated.

Vivotek PD8136 Specifications

General

Brand	Vivotek
Model	PD8136
Category	Security Camera
Language	English