Vivotek PT8133 - Page 72

VIVOTEK
72 - User's Manual
If you want to congure another sensor setting for day/night/schedule mode, please click the Prole
button to open the Prole Settings window as shown below.
Please follow the steps below to setup a prole:
1. Check Enable this prole.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range of
time if you choose Schedule mode.
3. Configure the settings in the following columns. Please refer to the previous page for detailed
information.
4. Click Save to enable the settings and click Close to exit the page.