Vivotek PZ7112 User Manual

VIVOTEK
114 - User's Manual
Group: https
NAME VALUE SECURITY
(get/set)
DESCRIPTION
connect 1025 ~ 65535 7/7 Specify the stunnel connect port.
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP connection redirect to
HTTPS connection
method auto,
manual,
install
6/6 auto => Create self-signed certificate automatically.
manual => Create self-signed certificate manually.
install => Create certificate request and install.
status -2 ~ 1 6/6 Specify the https status.
-2= Invalid public key
-1 = Waiting for certificate
0 = Not installed
1= Active
countryname string[2] 6/6 Country name in the certificate information.
stateorprovincename string[128] 6/6 State or province name in the certificate information.
localityname string[128] 6/6 The locality name in the certificate information.
organizationname string[64] 6/6 Organization name in the certificate information.
unit string[32] 6/6 Organizational unit name in the certificate information.
commonname string[64] 6/6 Common name in the certificate information.
validdays 0 ~ 9999 6/6 Valid period for the certification.
Drive the digital output
Note: This request requires Viewer privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/dido/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is 0 or 1; “0” means inactive or normal state, while “1” means active or triggered state.
PARAMETER VALUE DESCRIPTION
0 – Inactive, normal state
do<num>
0, 1
1 – Active, triggered state

Vivotek PZ7112 Specifications

General

Brand	Vivotek
Model	PZ7112
Category	Security Camera
Language	English