Vizio D50-F1 User Manual

3
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press the Left/
Right Arrow buttons to change
the setting:
• Color Temperature -
See
Adjusting the Color
Temperature.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select O, Low, Medium, or
High.
• Backlight Control - Dynamically improves the contrast
ratio of the picture by locally adjusting backlight zones.
The adjustment is based on content.
• Reduce Noise - Diminishes artifacts in the image caused
by the digitizing of image motion content. Select O, Low,
Medium, or High.
• Game Low Latency - Select On to reduce video delay (lag)
when gaming.
• Film Mode - When lm content is detected, picture is
optimized. For best picture, set to On.
• Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
3. When you have nished adjusting More Picture Settings, press the
Exit button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
• Normal is optimized for
television viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the
picture for use as a
PC monitor.
3. When you have nished adjusting the color temperature,
press the Exit button on the remote.
More Picture
Color Temperature Normal
Black Detail Off
v
Game Low Latency Off
Gamma 2.1
Back
Color Temperature
Cool
Normal
Computer
Back
More Picture
Color Temperature Cool
Black Detail Low
Backlight Control On
Reduce Noise
Game Low Latency Off
Film Mode On
Color Space Auto
Gamma 2.2
Back
15

Vizio D50-F1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	50 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Display number of colors	1.073 billion colors
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	-
3D	No
Battery type	AAA
Number of batteries supported	2
Composite video in	0
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Processor cores	8
High Dynamic Range (HDR) technology	High Dynamic Range (HDR) 1500, High Dynamic Range 10+ (HDR10 Plus)
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Tuner type	Analog & digital
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	71.9 W
Product color	Black
Panel mounting interface	200 x 200 mm
Screw thread	M6
Package depth	151.9 mm
Package width	1270 mm
Package height	760 mm
Package weight	18600 g
Remote control type	XRT136
Operating system installed	SmartCast OS
On Screen Display (OSD) languages	ENG, ESP, FRE

Weight and Dimensions

Depth (with stand)	260.1 mm
Height (with stand)	718.1 mm
Weight (with stand)	13600 g
Depth (without stand)	84.1 mm
Width (without stand)	1129.3 mm
Height (without stand)	657.1 mm
Weight (without stand)	13300 g