Vizio D50-F1 User Manual

3
Scanning for Channels
The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for
free over-the-air channels (using an antenna) and cable channels
from an out-of-the-wall connection (without a cable box). Moving
the TV to an area with dierent channels requires the TV to scan for
channels again.
To perform an Auto Channel Scan:
1. From the CHANNELS menu,
highlight Find Channels, and
press OK. The auto channel scan
begins.
2. Wait until the channel scan is
100% complete. Highlight Done
and press OK.
3. Press the Exit button on the
remote.
If the channel scan is cancelled,
the channels that were already
discovered are retained. A new
channel scan will clear all channels.
SETTING UP CHANNELS
You can use the TV’s Channels menu to:
• Find Channels
• Select channels to skip
• Analog Audio
• Digital Audio
• Set Parental Controls
Channels
Find Channels
Skip Channels
Analog Audio Stereo
Digital Audio English
Parental Controls
Back
Find Channels
Channels Found
Digital
Analog
45% Complete
Cancel
Back
Skipping Channels
After a channel scan is completed, you may nd that some channels
are too weak to watch comfortably. There may also be some
channels you do not want to view. You can remove these channels
from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip
Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to
completely block a channel from being viewed, use the
parental controls. See Locking and Unlocking Channels .
To remove a channel:
1. From the CHANNELS menu,
highlight Skip Channel, and
press OK. The SKIP CHANNEL
menu is displayed.
2. For each channel you wish to
remove, use the Up/Down
Arrow buttons on the remote to
highlight the channel and press
OK. A
P appears to the right of
each channel you select.
3. When you have selected all
of the channels you wish to
remove, press the Exit button
on the remote.
Skip Channels
0 Test 0
1 Test 1
2 Test 2
3 Test 3
4 Test 4
Back
25

Vizio D50-F1 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	50 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Display number of colors	1.073 billion colors
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	-
3D	No
Battery type	AAA
Number of batteries supported	2
Composite video in	0
HDMI ports quantity	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Processor cores	8
High Dynamic Range (HDR) technology	High Dynamic Range (HDR) 1500, High Dynamic Range 10+ (HDR10 Plus)
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Tuner type	Analog & digital
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	71.9 W
Product color	Black
Panel mounting interface	200 x 200 mm
Screw thread	M6
Package depth	151.9 mm
Package width	1270 mm
Package height	760 mm
Package weight	18600 g
Remote control type	XRT136
Operating system installed	SmartCast OS
On Screen Display (OSD) languages	ENG, ESP, FRE

Weight and Dimensions

Depth (with stand)	260.1 mm
Height (with stand)	718.1 mm
Weight (with stand)	13600 g
Depth (without stand)	84.1 mm
Width (without stand)	1129.3 mm
Height (without stand)	657.1 mm
Weight (without stand)	13300 g