Vizio V21-H8 - Programming the Sound Bar; Learning TV Remote Commands

ENG - 16
Programming the Sound Bar
You can program your sound bar to accept TV remote IR commands.
HOME THEATER DISPLAY | QUICK START GUIDE
Installation Guide | Models:
Turn o your TV speakers when
programming your sound bar.
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
Function LED Behavior Description
Learn Volume Down
Waiting to learn:
Flash from bottom
to top and back
continuously.
Press and hold the OK and Volume Down buttons on the remote to put the sound bar into
learnig mode. While the sound bar is in learning mode, press the Volume Down button on
the TV remote control.
Learn Volume Up
Press and hold the OK and Volume Up buttons on the remote to put the sound bar into
learnig mode. While the sound bar is in learning mode, press the Volume Up button on the
TV remote control.
Learning conrmed:
All of the LEDs will
blink twice.
Learn Mute
Press and hold the OK and Mute buttons on the remote to put the sound bar into learnig
mode. While the sound bar is in learning mode, press the Mute button on the TV remote
control.