VIZIO VL420M/VL470M User Manual
Version 3/25/2009 49
www.VIZIO.com
H/V Position
To select the options in the H/V Position sub-menu, press the MENU button or the # button. A new menu
will be displayed showing the following H/V Position settings:
H-Position
Adjust the horizontal position of the picture.
V-Position
Adjust the vertical position of the picture.
H-SIZE
Adjust the horizontal size of the picture.
V-SIZE
Adjust the vertical size of the picture.
Auto Phase (for Component input only)
The TV will automatically look for the phase of the signal to fine tune
the picture.
Parental
If you want to restrict certain channel and program viewing, you can do this by turning on the Parental
Control. Selected programs, movies and channels can then be made available only after an authorized
password has been entered and accepted by the TV.
To select the options in the Parental sub-menu, press #II. Enter a password to
access the Parental menu. The default password set in the factory is 0 0 0 0.
Note: The Parental menu does not appear when the input mode is set to HDMI.
A new menu will be displayed showing the following Parental settings:
Rating Enable
Select from ON or OFF. If set to OFF, you will not be able to set the
US TV, US Movie, Canadian English, or Canadian French Ratings.
Channel Block
Block individual channels from being displayed.
To Next Page
Loading...
Need help?
General
