Volkswagen CC 2012 User Manual

Workshop Manual
CC 2012 ➤
P
assat 2011 ➤
Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V)
Engine ID
BWS
CNN
A
Edition 06.2019
Service
Service Department. Technical Information

Volkswagen CC 2012 Specifications

General

Brand	Volkswagen
Model	CC 2012
Category	Automobile
Language	English

Summary

3 Safety information

3.1 Safety precautions during work on fuel system

Provides safety guidelines for working on the fuel system.

3.3 Safety precautions when working on the cooling system

Safety guidelines for working on the engine's cooling system.

3.4 Safety precautions when working on ignition system

Safety measures for working with the ignition system.

10 – Removing and installing engine

1 Removing and installing engine

Overview of the engine removal and installation process.

1.1 Removing engine

Step-by-step guide for the engine removal procedure.

13 – Crankshaft group

1 Cylinder block (pulley end)

Overview and components of the cylinder block's pulley end.

1.3 Removing and installing poly-V belt

Procedure for replacing the poly V-belt.

2 Cylinder block, gearbox end

2.2 Removing and installing flywheel

Procedure for removing and installing the engine flywheel.

2.3 Renewing crankshaft oil seal (gearbox end)

Procedure for replacing the crankshaft oil seal at the gearbox end.

3 Crankshaft

3.6 Allocation of main bearing shells

Guide for selecting and allocating main bearing shells.

4 Pistons and conrods

4.2 Removing and installing pistons

Procedure for removing and installing pistons.

15 – Cylinder head, valve gear

1 Cylinder head

Overview and procedures for the engine's cylinder head.

1.2 Removing and installing cylinder head

Detailed procedure for removing and installing the cylinder head.

1.6 Checking compression

Method for checking engine cylinder compression.

2 Cover for timing chain

2.2 Removing and installing timing chain cover

Procedure for removing and installing the timing chain cover.

3 Chain drive

3.2 Removing and installing camshaft timing chain

Procedure for removing and installing camshaft timing chains.

3.5 Checking valve timing

Procedure for checking camshaft and valve timing.

3.6 Adjusting valve timing

Procedure for adjusting the engine's valve timing.

4 Valve gear

4.3 Removing and installing camshaft

Procedure for removing and installing camshafts.

4.4 Removing and installing camshaft adjuster

Procedure for removing and installing camshaft adjusters.

17 – Lubrication

1 Sump, oil pump

Overview of the oil sump and oil pump components.

1.3 Removing and installing sump

Procedure for removing and installing the engine oil sump.

1.4 Removing and installing oil pump

Procedure for removing and installing the engine oil pump.

2 Oil filter, oil pressure switch

2.2 Checking oil pressure and oil pressure switch

Procedure for testing oil pressure and the oil pressure switch.

19 – Cooling

1 Cooling system/coolant

Overview of the cooling system and coolant.

1.2 Checking cooling system for leaks

1.3 Draining and adding coolant

24 – Mixture preparation - injection

1 Injection system

Overview of the engine's fuel injection system components.

2 Injectors

2.2 Removing and installing injectors

Procedure for removing and installing fuel injectors.

2.3 Renewing seals on injectors

7 High-pressure pump

7.2 Removing and installing high-pressure pump

Procedure for removing and installing the high-pressure pump.

28 – Ignition system

1 Ignition system