– Using the Valve Fitting Tool - VAS6459- -1-, insert a new tire
valve.
– Remove the valve insert.
– Inflate the tire to approximately 3-4 bar (43-58 psi). The tire
bead must slip audibly over the lip of the rim when doing this.
– Install the valve insert.
– Check the tire pressure.
– Balance the tire.
9.4 Tire Sealant, Disposing
♦ Tire sealant or residue from it must not be mixed with other
wastes/fluids
♦ Accumulating fluid residue from tire sealant must be collected
and placed in a plastic container. The plastic containers can
be sent for recycling together with the tire sets (if the expiration
date has passed).
♦ The return or recycling can take place using the existing work‐
shop disposal systems
♦ Check with the company responsible for trash pickup for the
dealership.
Jetta 2011 ➤ , Jetta 2013 ➤
Suspension, Wheels, Steering - Edition 08.2015
9. Wheels and Tires 277
ProCarManuals.com
To Next Page
Loading...
Need help?
General
