VOLT TIME Source 2 - Product Interface

Volt Time Source 2 Installation Guide - alternative entry
Product interface
Light description
Status of charging station
White - Constant
Booting up the product
Green - Constant
Standby, ready for use
LED Blinks 1x
RFID card is scanned
Yellow - Constant
RFID card is authorised for the
charging session or the car is connected
to the charger.
Red - Blinks 1x
The RFID card is not authorised by
the Cloud to start charging.
Light blue - Constant
Waiting for the vehicle to initiate
charging or the car is full.
Dark Blue - Constant
Charging in progress
Light blue - Pulsating
Waiting for (Solar) power.
Green and blue - Pulsating
Updating firmware (updating can
take up to 15 minutes).
Red - Constant
WARNING
Critical error. Check the Installer app for
more information. Do not try to charge
the vehicle.
Red - Pulsating
Charger is locked
17