Volt Time Source 2 Installation Guide - alternative entry
Introduction
Before installing the product, please read the important
product and safety guide at volttime.com/manuals. Here
you can also find other versions and languages.
This installation and setup guide includes:
● Mounting and wiring up Source 2
● Configure the product
● LED status description
To install and configure a Volt Time charger, a mobile device
with an internet connection is required as well as an
internet source connected to the charger (Ethernet or an
optional 4G LTE connection).
WARNINGS AND CAUTIONS
Whenever a condition, hazard or unsafe practice can result
in serious personal injury or death, a WARNING will be
indicated.
WARNING: Volt Time stipulates that the installation as well
as all maintenance or reparation on this product must be
performed by a certified electrician. All applicable local,
regional and national regulations for electrical installations
must be followed.
To Next Page
Loading...