Volt Time Source 2 Installation Guide - alternative entry
Installation
WARNING: Prior to the installation of the product, the power
supply must be switched off. Make sure to follow this manual
closely, and with extreme caution.
The instructions and procedures discussed in this manual must
be followed and applied at all times, or it will result in an
invalidated installation. This will cause Volt Time B.V. and its
partners to waive all liability and claims for compensation.
Installations and maintenance on this product must only be
performed by qualified and authorised personnel. Any technical
support or repairs on the product must be executed by Volt
Time or a pre-approved Volt Time certified company.
All applicable local, regional and national laws and regulations
must be adhered to at all times.
Do not install or use the product in case of damage as it can
lead to unsafe or hazardous conditions which may result in
electrical shock or (potentially fatal) injury.
Avoid placing the product in a location exposed to direct
sunlight or extreme weather/temperature conditions.
To Next Page
Loading...