Sonic Series
AC EV Charging Station
User Manual
- 7 -
2.3. Installation
2.4. Operation
Safety protection must be done when installing the EV Charging
station.
Installation and wiring should be done by personnel with professional
qualification, otherwise, hazardous electric shock may result.
Make sure input power supply is entirely disconnected before wiring;
otherwise, hazardous electric shock may result.
PE terminal of the EV Charging station must be grounded securely; otherwise,
hazardous electric shock may result.
The lead nose of the charging station must be securely attached or there is a
risk of damaging the equipment.
Leave no metals such as bolts, gaskets into the inside of the EV Charging
station; otherwise, hazardous blast and fire may result.
Main loop terminal of the EV Charging station should be firmly connected with
the wiring ends; otherwise, damage to property may result.
Bare parts of wiring ends of electrical cables must be wrapped with insulating
tape; otherwise, hazardous fire and property loss may result.
Strictly forbidden for minors or persons of restricted capacity to approach the
charging station to avoid injury.
Forced charging is strictly forbidden when the electric vehicle or charging
station fails.
It is strictly prohibited to use the charging station when the charging adapter
or charging cables are defective, cracked, worn, broken or the charging cables
To Next Page
Loading...