contained in these operating instructions. The following symbols
must be observed:
= Attention! Dangerous voltage, do not touch! Mortal
danger!
CAT II = Overvoltage category II (two)
= Protection class II
• Measurements of currents are only permitted in such electric cir-
cuits which are secured by 20A and in which the voltages do not
exceed 250VDC/VACrms. This measuring instrument must not be
used in installations of the overvoltage category III according to
IEC 664.
- Measuring devices and accessories are not toys and do not
belong in the hands of children under any circumstances!
- In commercial institutions, the accident prevention regulations of
the Employer’s Liability Insurance Association for Electrical
Systems and Operating Materials are to be observed.
- In schools, training centres, computer and self-help workshops,
handling of measuring instruments must be supervised by trained
personnel in a responsible manner.
30
To Next Page
Loading...
Need help?
General
