36
b) Symbols in the LCD display
No. Symbol Meaning
A
Battery capacity
B
Automatic shut-off is enabled
C -- Measurement value
D VFC Alternating voltage / alternating current measurement with
software low-pass lter
E ZERO Zero reset
F
Automatic measurement range is enabled
G NCF Non-contact alternating voltage recognition
H
HOLD function is enabled
I
Symbol for the acoustic continuity tester
J
Symbol for the diode test
K DC Direct voltage/current
L AC Alternating voltage/current
M
True root mean square
N Ω
kΩ,MΩ
Hz
V
mV
A
mA,μA
nF
μF
mF
Ohm (unit of electrical resistance)
Kiloohm (exp.3), megaohm (exp.6)
Hertz (unit of electrical frequency)
Volt (unit of electrical voltage)
Millivolt (exp.–3)
Ampere (unit of electrical current strength)
Milliampere (exp.–3), micro-ampere (exp.–6)
Nanofarad (exp.–9; unit of electrical capacitance)
Microfarad (exp.–6)
Millifarad (exp.–3)
To Next Page
Loading...
Need help?
General
