128
Oil draining pump
An electrically powered draining pump for oil is also
available as extra equipment. This pump is installed in
a suitable position by using a bracket. The pump can
be run in the desired direction by changing the polarity
of the cables.
The oil hoses should have a shut off valve or beeing
connected only when changing oil to avoid the risk of
accidental draining.
Oil and coolant drain systems
General
Engine installations in boats and vessels, carry the
potential for negative impact on the environment. The
liquids necessary are harmful and should be handled
in a safe way.
The figure above shows a concept of how this could
be solved via a central waste pump connected to the
important positions in the engine room.
The systems must comply with local ruling and legis-
lation.
1
4
2
3
7
5
6
1. Waste fluid
2. Pump
3. Valve block
4. Coolant drain connection
5. Engine oil drain connection
6. Reverse gear oil drain connection
7. Pipe to drain the bilge
To Next Page