47
Engine installation
Preparing the engine
NOTE! Installations in the engine room for the cooling
system, exhaust system, electrical system etc.
should be as complete as possible before the engine
is installed.
Install extra equipment and accessories on the en-
gine, such as extra alternator, hot water outlet, power
take-off etc. before engine is installed. The figure
above shows a flexible mounted engine.
NOTE! All engines and reverse gears are delivered
from Volvo Penta without oil and coolant. Check that
the oil plug and draining cocks for coolant, hot water
cocks etc. are closed.
Fill oil and coolant. See chapters
Coolant
and
Filling
with coolant
, pages 61–62.
Check for leakages.
To Next Page
Loading...