Trip page, key 3
The page displays:
- Trip fuel used since last reset
- Instantaneous fuel rate (volume of fuel used per
hours)
Or instantaneous fuel rate (volume of fuel used per
distance, if speed available)
- Trip engine hours since last reset
- Total engine hours (non re-settable)
To reset the trip values (trip fuel and trip hours) just
press and hold key 3 for one second. The unit will
bleep and the values are reset.
Note! For twin-engine display configuration, the data
for each engine will be a sum of the data from both
engines except for engine hours. Engine hours for twin
engines will be shown separately.
Engine hours digit size is reduced if the number beco-
mes too large to fit.
Single engine screen
Twin engine screen
To Next Page
Loading...
