WARNING
Risk of serious accidents.
Unfamiliar control patterns could cause confusion
and accidents resulting in serious injury.
Use extreme caution when using the control levers
after changing the control pattern and until you
become familiar with the new pattern.
2. Proportional roll switch to control X3
hydraulic flow (optional equipment)
Proportional roll switch to operate optional
equipment (X3, for example rototilt bucket).
Hydraulic oil flow, changing maximum setting
for X3
There is a possibility to set the maximum hydraulic
oil flow used for X3, see “Hydraulic oil flow,
changing maximum setting for X1 and X3” under
the explanation of position 8.
3. Horn
Button depressed: Horn signal.
4. Control lockout lever for working and travel
Shift the lever to position (A). The operating
levers for working and travel hydraulics are
locked (no movement possible).
NOTE!
The control lockout lever must be fully in the upper
end position to secure that the hydraulic is locked.
Shift the lever forward to position (B). The
operating levers for working and travel hydraulics
are unlocked (working position).
To Next Page
Loading...
