Service and maintenance
92 Cooling system
7 Fasten the return hose (8.3) again and fill the radiator up to the
filler neck (8.1).
8 Fill the compensation tank (7) up to the FULL (MAX) mark with
coolant and close all caps.
9 Start the engine and let it run at idle speed for approx. 2 minu-
tes.
10 Fill up coolant in radiator (8) and compensation tank (7) up to
FULL (MAX) mark on the compensation tank (7).
NOTE! Check rubber hose and cap on compensation tank for
leaks!
Checking the fan belt tension
The tension of the fan belt should be checked every 250 ope-
rating hours.
– Appropriate belt tension is an essential prerequisite for the cor-
rect function of the alternator and a long lifetime of the belt it-
self.
– A belt of poor condition must be replaced immediately.
– A correctly tensioned belt must be compressible by 10 to 12
mm between the two outer pulleys.
Type Filling capacities
EC35 6 litre
EC45 6 litre
WARNING!
Dispose of collected coolant environmentally.
1012201
To Next Page
Loading...
