Standard STD 101-0001
Volvo Group
Version
4
Page
35
Query
Z
Visual response
Figure 41 - Direction through model coordinate
system. Direction of lay parallel to the X-
coordinate axis
Figure 40 - Direction through supplemental geometry.
Direction of lay perpendicular to the
represented line element
4.9 Other applications of 3-D annotation
It is possible to apply the rules stated in this standard for those types of requirements that are suitable to specify by
using 3-D annotation, e.g. to specify various types of joining requirements. The features concerned shall then be
associated to the annotated requirements. Figures 42 and 43 show examples of symbolic representation of welds.
Figure 42 – Symbolic representation of a fillet weld using 3-D annotation
To Next Page
Loading...
