17
DIGITAL MUSIC CORPORATION
Preset Access
There are three different ways of accessing presets, "Bank",
"Bank4" or "Direct".
Bank mode lets you access your presets as 10 banks of 10
presets each. This way you use [SELECT ∧ or ∨] to choose the
bank, then [0-9] to call up each preset within that bank.
Bank4 mode lets you access your presets as 25 banks of 4
presets each. You still use [SELECT ∧ or ∨] to choose the
bank, but only [1-4] to call up the presets. This frees up the
upper row of buttons for instant access to other functions. This
mode is most commonly used if you have a GCX Guitar Audio
Switcher and you want to have instant control over the loops.
Direct mode let you access your presets by directly entering
the number of the preset. For example, to recall preset 37, you
would press [3] then [7]. In this mode, [SELECT] acts as
increment and decrement. This mode is used if you have a rigid
set list and want to pre-program all of the changes.
The Ground Control is initially set to "Bank". To select a
different preset access mode, press [SELECT] until the display
reads:
P. ACC.=BANK
Press [DATA] to select between Bank, Bank4 or Direct.
If you choose Bank4 mode, the Ground Control will default to
the upper row of buttons controlling GCX #1 loops 1-6. You
can redefine these buttons by pressing [CURSOR >] to select
each button. Read the section above under Expanders titled
"Ground Link" for a description of reprogramming buttons.
To Next Page
Loading...
Need help?
General
