18
DIGITAL MUSIC CORPORATION
Initialize Memory
This function restores the Ground Control's memory to the
factory settings.
1. Press [SELECT] until the display reads:
INIT MEM Y/N
2. Press [+/YES].
3. After the warning, if you still want to continue, press
[+/YES] again.
Exiting SETUP MODE
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
To exit SETUP MODE, press either [SETUP MODE] button
and answer [+/YES] to the prompt. The Ground Control will
return to Preset mode.
To Next Page
Loading...
