EasyManuals Logo

Voodoo Lab GROUND CONTROL User Manual

Voodoo Lab GROUND CONTROL
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
16
DIGITAL MUSIC CORPORATION
System Mix Plus VCA
The System Mix Plus includes a stereo volume control (VCA)
which can be accessed remotely with your Ground Control. A
VCA is a V
oltage Controlled Amplifier which is just a fancy
name for a type of volume control. For the VCA to be
controlled by your Ground Control, it must be enabled here.
To enable the VCA, enter Setup mode and activate this
function by pressing [EXPANDERS]. Then press [SELECT ]
until you see:
VCA IS OFF
Press [+/YES] to turn VCA control on.
Note: When the VCA is enabled ("VCA IS ON"), you can only
use devices 1 through 7. Memory for device #8 is used to
store volume levels.
Utility
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Utility allows you to change certain default settings for the
Ground Control. Enter Setup mode and press [UTILITY] to
activate this function.
Directory Speed
This lets you control how fast the directory of presets scrolls
when you enter a new Bank.
Press [SELECT] until the display reads:
DIR SPEED=2
Press [DATA] to enter a value from 1 (slowest) to 4 (fastest).

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Voodoo Lab GROUND CONTROL and is the answer not in the manual?

Voodoo Lab GROUND CONTROL Specifications

General IconGeneral
BrandVoodoo Lab
ModelGROUND CONTROL
CategoryMusical Instrument
LanguageEnglish

Related product manuals