6
DIGITAL MUSIC CORPORATION
Expression Pedals
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
There are two Pedal inputs on the back of the Ground Control.
Many devices allow you to change parameters in "real-time" via
MIDI Continuous Controllers.
Any passive guitar volume pedal can be used. Guitar volume
pedals always have high impedance pots, typically 250K.
To connect your pedal, simply plug a guitar cord between Pedal
jacks 1 and 2 on the Ground Control and the AMP or OUT jack
of your volume pedal(s).
To Next Page
Loading...
