Voom SuperDuper - Verify Drives Procedure; Wipe Drives Procedure

Voom Technologies, Inc. © 2007-2013 Proprietary www.voomtech.com
6.4 Verify Drives Procedure
The following table describes the sequence associated with performing a verify
operation of each target drive using the button panel interface.
LCD interface Comments
SuperDuper 2-01
Status: Ready
Drives: 12345678
From the main window, press <menu> to
display the initial menu item.
1:System Test
Press < menu > again to advance to the next
menu item.
2:Clone Drive
Press < menu > again to advance to the next
menu item.
3:Verify Drives
Press <enter> to execute the verify drives
command.
Verify SHA Data
OK (enter/cancel)?
Press <enter> to acknowledge that you want to
proceed.
Verifying 3.8GB/min
00:16:03 61GB/80GB
Interim status of the verify operation.
Operation Complete
The status displayed after it completes the
command.
6.5 Wipe Drives Procedure
The following table describes the sequence associated with performing a wipe
operation on each of the target drives using the button panel interface.
LCD interface Comments
SuperDuper 2-01
Status: Ready
Drives: 12345678
From the main window, press <menu> to
display the initial menu item.
1:System Test
Press < menu > again to advance to the next
menu item.
2:Clone Drive
Press < menu > again to advance to the next
menu item.
3:Verify Drives
Press < menu > again to advance to the next
menu item.
4:Wipe Drives
Press <enter> to execute the wipe drives
command.
Wipe Target Drives
OK (enter/cancel)?
Press <enter> to acknowledge that you want to
proceed.
Wiping 3.9GB/min
00:11:01 43GB/80GB
Interim status of the wiping operation.
Operation Complete
The status displayed after it completes the
command.
14