Voom SuperDuper - Verify Drives Procedure

Voom Technologies, Inc. © 2007-2013 Proprietary www.voomtech.com
. . .
00:14:08, 77607936 sectors, 32.7MB/sec (2.8GB/min average)
Target drive 1 is DONE [0x0000], [0x0001]
00:14:15, 78136128 sectors, 38.8MB/sec (2.8GB/min average)
Wipe Complete (00:14:15, 40.0GB)
Operation Complete (00:28:49, 80.0GB)
7.3 Verify Drives Procedure
When using the serial interface, the command syntax for verifying each of the
target drives is given below:
Verify [blks]
blks only verify blks sectors
=> Verify
Verifying SHA Data
OK (y/n)? y
Verifying 156301488 sectors on All drives
00:00:09, 838656 sectors, 32.1MB/sec (2.6GB/min average)
00:00:20, 1935360 sectors, 57.7MB/sec (2.9GB/min average)
00:00:30, 3096576 sectors, 57.8MB/sec (3.1GB/min average)
. . .
00:30:32, 156301488 sectors, 57.7MB/sec (2.9GB/min average)
Source SHA:
SHA_A:49bc20df15e412a64472421e13fe86ff
SHA_B:1c5165e18b2afccf160d4dc19fe68a14
Drive 1 SHA:
SHA_A:49bc20df15e412a64472421e13fe86ff
SHA_B:1c5165e18b2afccf160d4dc19fe68a14
. . .
Drive 8 SHA:
SHA_A:49bc20df15e412a64472421e13fe86ff
SHA_B:1c5165e18b2afccf160d4dc19fe68a14
Verify Passed
19