Voom Technologies, Inc. © 2007-2013 Proprietary www.voomtech.com
11 Specifications
This chapter describes the specifications for the Model No. VMSD-P1 Hard Drive
Duplicating Unit. Specifications subject to change without notice.
AC Electrical Requirements
Voltage 100-240V auto ranging
Frequency 50-60 Hz
Input Current 12A @ 115V / 6A @ 230V
Output Watts 500 W
Operating Environment
Temperature 50 to 95 Degrees F
Relative Humidity 20% to 80% (non condensing)
Altitude 0 to 8000 Feet
Physical Characteristics
Height (chassis) 6 inches (152.4 mm)
Height (light tower) 17.375 inches (441.325 mm)
Width 17 inches (431.8 mm)
Depth 21 inches (533.4 mm)
Weight 22 pounds (10 kg)
11.1 CE
Users need to notify any information technology equipment users within a 60
meter radius that SuperDuper may interfere with other electronic equipment.
Although the manufacturer has not observed electromagnetic interference from
the SuperDuper with other electronic equipment in its development lab or offices,
this is not an indication that the user will not experience electromagnetic
interference from the SuperDuper with other electronic equipment within the 60
meter radius.
11.2 FCC Exemption
This device is exempt from FCC regulations under Part 15, Section 103 c.
27
To Previous Page
Loading...