Voom Technologies, Inc. © 2007-2013 Proprietary www.voomtech.com
LCD information Error Explanation
Operation Failed
-Drive read error
Unable to recover from a read error, but
could not determine if it was the Source
drive or one of the Target drives.
Hint: Manually remove one Target drive at a
time until the problem is resolved. If the
problem persists, replace the Source drive.
Operation Failed
-Drive write error
Unable to recover from a write error, but
could not determine if it was the Source
drive or one of the Target drives.
Hint: Manually remove one Target drive at a
time until the problem is resolved. If the
problem persists, replace the Source drive.
Operation Failed
-Drive access error
Unable to recover from an error, but could
not determine either the type of access or
which drive that was at fault.
Hint: Manually remove one Target drive at a
time until the problem is resolved. If the
problem persists, replace the Source drive.
24
To Next Page
Loading...