VA41620/VA41630 Evaluation Board User’s Manual
V1.0
26
At this point, the VA416x0 information will be installed in the Keil file structure and will be
available for use. It includes:
• Datasheet and programmers guide
• SVD file (used by debugger to show register and bit names)
• VA416xx.h file which has all the register and bit definitions
• Programming files for the SPI FRAM on the MCU or on the board.
5.1.3 Configuring options
The Keil IDE is a very powerful and flexible tool which requires several options to be assigned
before it is operational with a specific MCU and SWD debugger probe. The following sections
provide the minimum options for the VORAGO software development kit to function.
All the options can be accessed under the Project pull-down menu as shown here. An
alternative way to access the options is to right-click on top level folder of the project.
To Next Page
Loading...