Packing Press 100 P2
Version: 111300001, M0004459B
Date: 13.12.2013 - 13 / 44 -
1.8 Use for purpose intended
This machine/line is intended and constructed for the following use in full compliance with the contractual terms:
INFORMATION!
The press may only be used for the pressing of fruit, vegetables and herbs that contain juices.
The stones must be removed from all stone fruit, unless the stones are no bigger than cherry pits
and do not have sharp edges (danger of breaking screen belt).
Any other use of this machine/line represents an improper use of the machine/line.
The correct use of this machine/plant to terms of the contract requires further that the documentation/Operating
Manual as also the specified inspection and servicing intervals are strictly adhered to.
Although this machine/plant has been constructed to the highest technical standards and the recognised standards
of safety and has been accepted by the client, danger of injury or of loss of life may none-the-less arise for the user
or third persons as a result of its use, or the machine/line may itself be damaged.
The machine/line may only be operated when in a technically perfect condition, in a professional manner and when
the operator is fully aware of the safety and danger aspects.
Recognised weaknesses or faults that may reduce the safety of operation, must be dealt with in a professional
manner immediately or must be reported to customer service in a manner that can be proven!
Changes must not be made to the machine/line settings values.
WARNING AGAINST GENERAL DANGERS
This machine/line was constructed to the current standards of engineering and the currently
applicable Safety of Machinery Directive (MSV) .
Non-observation of the safety regulations contained in the Operating Manual during
operation of the line/machine can endanger the operating staff or third persons or have a
detrimental effect on the line/machine or its properties.
1.9 Improper use
WARNING AGAINST GENERAL DANGERS
Any use of this machine/line other than that as defined in the chapter "Correct Use", represents an
inappropriate use of the machine/line and can result in serious injuries of the operating staff or third
persons or to the damage or destruction of the line/machine.
The manufacturer/supplier cannot be held liable for any damage resulting from an inappropriate
use of the machine/line.
In such cases the user assumes full liability.