voran 100 P2 - Maintenance Intervals

Packing Press 100 P2
Version: 111300001, M0004459B
Date: 13.12.2013 - 30 / 44 -
10.3 Maintenance Intervals
Maintenance Interval
A
B
C
1-shift operation
before start of work
monthly
annually
2-shift operation
before start of work
weekly
monthly
3-shift operation
--
--
--
NOTE!
The intervals specified in the maintenance table are values recommended for normal operating
conditions.
In the event of rough operation conditions, multi-shift operation, and longer working times, such
intervals must be shortened as necessary.
Safety facilities must be checked at monthly intervals.
INFORMATION!
Unless otherwise stated in the various maintenance tables, you will find more detailed
information on the exact settings in the chapter "Checks and Settings Prior to Initial
Startup/Restart".
The specific replacement procedures are described in detail in the chapter "Maintenance and
Repair".
Maintenance Intervals - Frame 100P Rotary Cage
Work to be carried out
A
B
C
Check welded connections for visible damage (cracks)
X
Check frame for visible damage
X
Maintenance Intervals - Cylinder, Welded, 100 P
Work to be carried out
A
B
C
Check piston rod for visible damage
X
Check cylinder, connections, and lines for leaks
X
Check welded connections for visible damage (cracks)
X
Maintenance Intervals - Hydraulic Pump 1 Cylinder 380 bar
Work to be carried out
A
B
C
Check oil level and, where necessary, replenish oil
X
Check hydraulic system for leaks
X
Check pressure controller for proper functioning
X
Check whether handwheel of drain valve moves smoothly
X
Check belt tension
X
Maintenance Intervals - Electric Motor 1.5 kW, with Reversing Switch and Cable
Work to be carried out
A
B
C
Check of electrical connections, links, switches, drives,
and fuses
X
Check pulleys for visible damage
X
Check attachment screws for tightness
X