VORON ERCF v2 - Page 100

WWW.VORONDESIGN.COM
CAD version: ERCF V2
100100
SELECTOR
Filament Hinge
1.75mm Filament
Selector_Door
DOOR INSTALLATION
Add a drop of CA glue and install the 3x2mm magnet into the
door recess so that it attracts the door as a magnetic latch.
Attach the Selector_Door to the Selector_Cart using piece of
1.75mm Accent filament & trim to length.
DOOR AND BELT TENSIONER
3x2mm Magnet