WWW.VORONDESIGN.COM
CAD version: ERCF V2
16
We have provided the ERCFv2 CAD files (ERCFv2/CAD/ERCFv2.STEP and ERCFv2.F3D), so that you can follow along with
the instructions in a 3D view, if you like.
The CAD file is organized into folders based on the instructions in this manual. First hide all the parts, and then reveal the
parts up to the step you are on in this manual, and the CAD should match what you are building.
All of the non-printed parts are in each section’s Hardware folder.
16
INTRODUCTION
USING THE CAD FILE
To Next Page
Loading...
