10
CLEANING AND PREVENTIVE MAINTENANCE
4 CLEANING AND PREVENTI-
VE MAINTENANCE
A DANGER
■ Prior to each maintenance and cleaning,
cooker hood must be unplugged, and
appliance must be dead
■ Cleaning and user maintenance of
the appliance shall not be performed by
unattended children.
■ The surface could be damaged due to
aggressive and abrasive cleaning agents.
Never use aggressive and abrasive cleaning
agents. Supply your cleaning and protective
substances that are appropriate for your
appliance from the authorized technical
service. Surface of appliance and control units
are sensitive to scratching.
■ Clean the surfaces with a soft and damp
cloth, dish-washing liquid or mild glass
cleaning agent. Soften the dry, sticky dirt with a
damp cloth. Do not scrape!
■ It is not appropriate to use dry cloths,
sponges that may scratch, materials that
require rubbing, and other aggressive cleaning
agents containing sand, soda, acid or chlorine.
■ Clean the stainless steel surfaces in their
brushing direction only.
■ Do not use stainless steel cleaning agents
and wet clothes for control units. Cleaning of
metal grease lters Used metal grease lters
retain the greasy particles in the moisture and
vapour generated in the kitchen. Clean the
metal grease lters about every three months,
under normal use conditions (1 to 2 hours a
day).
■ Do not use excessively effective, acidic or
alkaline cleaning agents.
■ For cleaning the metal grease lters, clean
the holder parts of the metal grease lters in
the appliance, with a damp cloth as well.
■ You can clean the metal grease lters in the
dishwasher or by hand.
4.1 Washing in Dishwasher
■ In case of washing in dishwasher, a slight
change might occur in colour. This has no effect
on the function of the metal grease lter.
■ Do not wash the excessively dirty metal grea-
se lters together with dishes.
■ Place the metal grease lters loosely and fre-
ely in the dishwasher. Metal grease lters must
be placed in the dishwasher without jamming.
4.2 Hand Wash
For stubborn dirts, you can use a special
grease solvent. You can buy such an agent
from the authorized sales centre.
■ Soften the metal grease lters in a hot water
with dish-washing liquid.
■ Use a brush for cleaning and wait for the liq-
uid in metal grease lters to ow off completely.
■ Rinse the lters thoroughly after cleaning.
A DANGER
Thanks to timely cleaning of metal grease lter,
the re danger caused by excessive heat that is
generated during frying is avoided.
4.3 Removal/Installation of Alumini-
um Filter
Pull the aluminium lter towards you by press-
ing on its tab. Reverse the process to install the
lter.
To Next Page
Loading...