To Next Page

To Previous Page

IntroductionPanel TourSetupPlayingCreating

and Storing

NOTE: If you haven’t connected an external effect processor to the INSERT RETURN jacks, the

INPUT signal will bypass the insert circuit whether the INSERT button LED is lit or dark.

ACTIVATING OR DEACTIVATING THE KEY LOCK FUNCTION

Here’s how you can use the Key Lock function to disable ToneLab LE’s buttons, selectors, and

knobs so they can’t be accidentally changed during a live performance.

NOTE: While the Key Lock function is activated, you won’t be able to operate any controls except for

the switches, pedals and the EXIT/TUNE button.

NOTE: The Key Lock setting is cancelled when you turn off the power; it will be disabled when you turn

on the power once again.

ACTIVATING THE KEY LOCK FUNCTION

1. If the name display shows anything other than a program name, or if the characters of the

program name are blinking, press the EXIT/TUNE button.

2. With the program name shown in the name display, press and hold the EXIT/TUNE button

for at least one second.

The name display will indicate KEY LOCK for one second, and then the value knob LEDs

will go dark.

DEACTIVATING THE KEY LOCK FUNCTION

1. If the name display shows anything other than a program name, press the EXIT/TUNE but-

ton.

2. Press and hold the EXIT/TUNE button for at least one second.

The name display will indicate LOCK OFF for one second, and then the value knob LEDs

will light.

Vox Tonelab LE User Manual

Questions and Answers: