VStarcam FC2 - App Setup and Registration; Downloading the Mobile App; User Account Registration; Adding Devices to the App

5.APP Download
①Scan below QR code to download the APP.
6. Register 
Choose "Faster Register", then enter your account and
password to sign in.
7. Adding Devices
After sign in the APP, please click "+" in the top right
corner, there are two ways to add it, "Scan QR code" and
"Others".
If "Scan QR code" adding method failed, please Note:
try "Others" method to add the device.
7.1Scan QR Code
Please power on the floodlight camera, waiting about 30
seconds until the reboot of floodlight camera is finished,
then it will send voice prompt for WiFi configuration.
(If there is no voice prompt, please reset the floodlight
camera by pressing the reset button about 10 seconds. If
reset successfully, it will prompt "reset completed, will
restart the device. ")
②Search "Eye4" in APP store, Google Play or other mobile
phone application store.
③Visit【http://www.vstarcam.com】to download the APP.