FAQ
Q: How to reset the floodlight camera to factory default
setting?
A: Press and hold the reset button for about 10 seconds to
reset the floodlight camera. It’s default password: 888888 (To
improve the security, it is highly recommended to modify the
initial password).
Q: Any tips for WiFi connection?
A : The floodlight camera supports only 2.4G frequency
signal，and 802.11b/g/n WiFi network.
1). The WiFi password should be less than 16 digits, and can
not contain special characters, such as @ $ etc. , suggest
you to make a password that contains only letters and
number.
2). Please upgrade the APP to the latest version.
Q : No vision at night time ？
A: ① Check if the IR function is enabled or not;
② Check if the IR LED is on or not;
③ Reset the camera back to factory setting;
④ Upgrade the camera to the latest firmware.
Q：What to do if camera’s picture is blurred?
A : ① Login the camera's web interface, adjust the picture
quality to HD mode;
To Next Page
Loading...
