13
sETTING UP
Telephone base installation
Note: Ensure power cord is fed through slot on base so
Insert the power adapter and the telephone line cord
into the base station, as shown below.
Insert the telephone line cord into a telephone wall
Insert the other end of the power adapter into the
wall outlet.
1.
2.
3.
Plug the other end
of the telephone
line cord into the
the back of the
telephone base.
Route the power
adapter cord
through this slot.
Plug the small end of the
telephone base power adapter
the back of the telephone base.
Plug the large end
of the telephone
base power
adapter into a
power outlet.
Plug one end of the
telephone line cord
into a telephone
If you have DSL
high-speed
Internet service,
included) is
required.
Route the
telephone line cord
through this slot.
To Next Page
Loading...
