132
The iPhone ringtone played is unclear or too loud with
noise.
The quality of ringtone played on your telephone is
Try using another iPhone ringtone to test the quality.
My cordless handset isn’t performing normally.
Make sure you plug the power cord securely into
the telephone base. Plug the power adapter into
a different working electrical outlet without a wall
switch.
Move the cordless handset closer to the telephone
base. You may have moved out of range.
Reset the telephone base. Unplug the electrical
power. Wait for 15 seconds, then plug it back in.
Allow up to one minute for the cordless handset and
telephone base to reset.
Other electronic products such as HAM radios and
other DECT phones can cause interference with your
cordless phone. Try installing your phone as far away
as possible from these types of electronic devices.
Out of range OR No pwr at base appears on my
cordless handset.
Ensure you plug the telephone base in properly and
the power is on.
Place the cordless handset in the telephone base for
one minute to allow the cordless handset and base
to synchronize.
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
